Bigfoot Wood Carving

Before you start carving your bigfoot, you should determine which types of wood you’re going to use. Some common choices include American white oak, Douglas Fir, and Basswood. In this article, you’ll discover what to avoid and how to choose the right wood for the job. Then, use those tips to create the perfect bigfoot sculpture. After that, enjoy carving! And don’t forget to share your creation with your friends and family!

Bigfoot Wood Carving

Douglas Fir

Known for his intricate designs and exquisite craftsmanship, Bigfoot is carved from Douglas fir. The wood is unique, with natural rings, which make each disk unique. The piece weighs about 1,500 to 2,000 pounds. The carved sculpture is a great addition to any living room. Wood carving supplies from Bigfoot Carving Tools, LLC are available for purchase. There are several brands available to suit your needs.

American white ash

When it comes to Bigfoot wood carving, the most popular species is the white ash. This hardwood is found throughout eastern North America, usually growing between 70 and 100 feet high with a diameter of up to 5 feet. Though not listed on the CITES list, the IUCN Red List notes that the species is critically endangered. This is largely due to the fact that ash trees are often cut down before being attacked by boring beetles.

The best part about using this wood is that it’s readily available. You can find it at any hardwood dealer, and it’s fairly inexpensive: roughly $2 per board foot. You can also find furniture squares, bat blanks, and ash veneer at cabinetmaking suppliers. In addition to this, the grain of flat-sawn white ash is usually either subtle or wild. It can even contain burrowing insect larvae!

American white oak

Jake Swanson specializes in wood carvings of bigfoot. The woodcarver works out of a shop in Stowe, Vermont. He also sculpts other mystical creatures in American white oak. He says that carving bigfoot takes a lot of attention and accuracy. Here are his methods. One way he achieves this is by using the “center of the tree” wood for his Bigfoot sculptures. This wood is unique because of the enigmatic arrangement of annual growth rings.

The white oak tree is unique to North America. It grows exclusively in the U.S. and is widely distributed in mixed hardwood forests. There are many subspecies of this tree, and it accounts for approximately thirty percent of the hardwood resources in the U.S. White oak is tall and rounded with a brownish-red fall color. These trees grow from the northernmost parts of the continent to the southernmost points of the continent, and in both high-lying and low-lying areas. Each region of the country has distinct characteristics for white oak trees.


When it comes to bigfoot wood carving, the right tools are important. Using blunt tools will only create frustration and waste time. Fortunately, a chip carving knife and a pair of chisels will be sufficient for smaller pieces made of basswood. A set of carving tools often includes a chisel in different shapes. A mallet is essential for large pieces, but a small set will be sufficient for carving in soft woods such as basswood.


If you are interested in creating a wooden Bigfoot, cottonwood is an excellent choice. The soft wood is much less expensive than basswood, and is available in many lumberyards for less than a dollar per board foot. Although cottonwood does not have the same hardness as other woods, it is more dense than many other types. You can also find it in many colors, and it is widely available online.

This wood does not have the density or strength of English brown oak or Honduran mahogany, and can be difficult to work with. It is also prone to decay, making it unsuitable for carving. But you may enjoy the practice of using cottonwood as it doesn’t require a high level of expertise and will keep your carvings looking good for a long time. But cottonwood isn’t for everyone, and if you are new to the craft, you may want to start with a more stable and durable material.


In the heart of the Colorado Rocky Mountains, Aspen Bigfoot Wood Carving has become a popular art form. It is a medium-sized deciduous tree, growing no taller than 80 feet and remaining relatively thin. Aspen trees typically live 150 years, and are a unique species because they grow together in groups called “stands.” In addition, aspen trees have identical genetics. They cluster together to form a forest in which they flourish.

While pine wood is commonly used for building and other outdoor structures, aspen wood is ideal for carving. The wood is lightweight, durable, and easy to work with, and its fibers are splinter-free. It can also be safely used for storing food. Besides its durability, aspen wood also takes paint well. A good paint job on aspen can last for many years. The drawbacks to this wood are primarily related to its smell and resistance.

Leave a Comment